Boiler & Hydronic
A selection of “wet heat” products
for indoor comfort
KEK cleans, maintains steam heating systems
Since 1937, plumbing and heating contractors have used KEK, manufactured by Kenite Laboratory Corporation, to clean and maintain the heating efficiency of steam and hot-water heating systems. KEK Boiler Cleaner and Steam Conditioner has been formulated to clean boilers and heating systems with a minimum of effort and without shutdown. No flushing or draining is necessary. KEK cleans boilers, lines and radiators of adhering scale, rust, oils, greases and organic scums. KEK contains no harmful caustics or acids. It can be left in the boiler water as long as desired without injuring metals or fittings. Each five-ounce can comes with a sample of test powder.
Kenite Laboratory Corp.
Watts introduces Series IPF flanges
Watts Regulator Company has introduced the new Series IPF Isolation Pump Flanges. The Series IPF is available in sizes half-inch to 2-inch with threaded end connections and half-inch to 1-1/2-inch with sweat end connections. Watts Series IPF Isolation Pump Flanges are designed to isolate circulator pumps to facilitate pump replacement or repairs. Series IPF Isolation Pump Flanges fit most circulator pumps and install directly to the circulator pump flange. Contractor’s can install the Series IPF faster, using less piping than traditional installations, saving time and money.
Watts Regulator Co.
Peerless WV-DV direct-vent boiler
The Series WV-DV direct-vent, oil-fired boiler from Peerless Boilers is for residential hot-water systems. This boiler is ideal for simple installations where a chimney is not available or where the existing chimney is no longer safe to use. The Series WV-DV sealed combustion boiler is also great for converting heating systems in houses with electric baseboard or a heat pump. A venting components kit allows for air-tight connection of vent pipe. The kit includes vent termination, burner termination and flexible, concentric, exhaust vent pipe (choice of 10-, 15- or 20-foot length). Other standard equipment includes Honeywell operating controls and a Taco 007 circulator. Features of the Series WV-DV boiler include a large water content and wet-base, cast-iron section design which reduces on/off cycling and steel push nipples that provide a water-tight seal between sections. The Series WV-DV is available with a choice of Riello BF5 or Beckett AFII high-efficiency, sealed-combustion, flame-retention burners.
Triangle Tube offers Maxi-Flo heat exchangers
Stainless-steel pool and spa heaters from Triangle Tube/Phase III, the Maxi-Flo pool heater is a uniquely designed, highly efficient heat exchanger that operates off of an existing oil-fired boiler. They are compact in size, lightweight and require minimum installation space. Available in five sizes that can accommodate any size pool or spa.
Triangle Tube/Phase III
Firelake’s line of waste-oil boilers
Firelake Manufacturing, LLC, offers a full line of boilers that use waste oil and other petroleum-based lubricants as a fuel source, saving thousands of dollars in energy costs and eliminating “cradle-to-grave” from the EPA. Boilers are available from 175,000 BTUs to 800,000 BTUs.
Firelake Mfg., Inc.
Lectro-Truck system eases boiler transport
Innovative Moving System’s Lectro-Truck stair-climbing system is capable of moving boilers and water heaters up and down steps, and onto and off of trucks and trailers. This hand truck enables one or two users to be able to move 1,500 pounds with the push of a button. The Lectro-Truck has been available for 35-plus years, and there are plumbers and contractors worldwide that use theirs daily.
Innovative Moving Systems, Inc.
Precision Boilers offers various boiler systems
Precision Boilers manufactures commercial, oil-fired or combination gas/oil-fired hydronic boilers from 9.5 bhp to 2,000 bhp. The units are constructed in accordance with ASME pressure-vessel requirements and registered with the National Board. The units are also UL-labeled and conform to the heat-loss requirements of ASHRAE 90 and ANSI Z21.10.3. In addition, Precision also manufactures fuel oil pump sets with electric pre-heaters for pumping heavy oil. Precision Boilers is an ISO certified manufacturing company.
Buderus Quick-Fit System aids boiler installations
Designed to pipe any boiler installation quickly and easily, the Quick-Fit System consists of three packaged modules and options. The Quick-Mix Mixing Station is perfect for use with low-temperature radiant floor heating, while the Quick-Pump Circulating Station is used with conventional high-temperature feeds to baseboard, radiators or hydro-air coils. Add the Quick-Header Junction Manifold for multi-zone or multi-function heating systems. The Quick-Fit System takes only minutes to connect and includes all the piping, valves, and circulating and control elements to supply radiant floor heating and conventional high-temperature heating.
Buderus Hydronic Systems
Dianorm panel radiators
Dianorm panel radiators are available in sizes up to 10 feet long and three feet tall, with bottom tappings, and come with a built-in Flowsetter valve. All radiators come with athermostatic valve and offer unique accessories, such as a “rough-in” tool and shelf support. Inventories of product are available for immediate shipment in New England, the Pacific Northwest, Rockies, New York and New York City. Heatlines, Inc is the exclusive North American Distributor and they are looking for additional reps and distributors.
Heatlines, div. Oventrop
MZ gas boilers
The Monitor MZ line of 95 percent AFUE boilers is a 20-year success story that can reduce fuel bills by 30 percent to 50 percent, and supply endless hot water. Natural gas or L.P. Perfect for all types of heating: baseboard, radiators, radiant floor and forced air.
Monitor Products, Inc.
Elite Steam Humidifier improves air quality
The GeneralAire Elite Steam Humidifier is designed to improve indoor air quality. This clean-steam humidifier is the perfect solution homes without furnaces, homes with minimal duct work or homes without adequate humidity in larger rooms. The Elite Steam Humidifier is easy to install and simple for the homeowner to operate. It features a completely automatic operation and it is easy to remove and replace the disposable cylinder. The Elite Steam Humidifier is available in three installation options. The DS-20 mounts directly to existing ductwork. Normal airflow through the duct distributes the clean steam throughout the home. The RS-20 mounts obscurely in a room and comes complete with a silent blower fan that delivers the steam throughout an area. The CS-20 is a closet installed version that allows for unobtrusive installation of the primary unit. A small blower unit is installed above the closet door allowing for clean steam to be distributed throughout the room.
General Filter, Inc.
1 | 2 | 3 | 4 | 5 |