OLATHE, KANSAS — Making its North American debut, ALPHA from Grundfos Pumps is an energy-optimized, 115-volt circulator featuring a permanent magnet motor design that will cut power consumption by a minimum of 50%, as compared
with other circulators in its class. Designed for hydronic heating
applications in residential and light commercial applications,
the compact ALPHA is equipped with the unique Grundfos
AUTOADAPT function that automatically modulates circulator
performance to match ever-changing system demands.
“By continuously fine-tuning power consumption and flow rates to meet the dynamic needs of the system, ALPHA saves both energy and money,” says Bob Reinmund, senior product specialist for Grundfos.
“In live field tests of the product, independent contractors have experienced power savings up to 80% over conventional circulators.”
Breakthrough motor design: First used by Grundfos in Europe earlier this decade, the electronically controlled motor features a magnetized rotor, thus avoiding motor-slippage problems common to induction-type motors. The result is a dramatically more efficient motor that generates less heat and energy waste, while delivering a starting torque four times higher than a standard induction motor — a key feature should the pump experience long periods of idleness.
No more oversized retrofits: Identifying the specific, ever-changing needs of a home heating system can be a challenging task for installers, particularly in retrofit applications. As a consequence, contractors often find it difficult to select the right pump and then to program it with the correct settings. “If the installer is not familiar with piping layout or hasn’t done the proper calculations, he may decide the best way to avoid a callback is simply to oversize the pumps,” says Reinmund.
“ALPHA creates an opportunity to address this oversizing tendency.”
With ALPHA, the installer now has the option of activating the AUTOADAPT function. “The circulator will automatically find the lowest possible operating-efficiency point to meet changing system demands,” continues Reinmund. “Then it will continuously adjust that setting to achieve optimal comfort at minimal power consumption — all without direct human intervention. The pump can operate with an input as low as five watts, as compared with a minimum of 80 watts for a conventional circulator of comparable size.”
Compact design = easy installation: ALPHA is currently the most compact circulator offered by Grundfos. Rather than being attached to the circulator’s body, its sophisticated electronics are fully integrated within the motor. The resulting streamlined design simplifies installation in even the tightest of spaces.
The easy-to-read LED (light-emitting diode) display in the ALPHA offers a range of unique, userfriendly features for monitoring the system:
A large, real-time display indicates energy consumption (Watts).
This same display will toggle every four seconds between power consumption and the flow
indicator, showing the relative estimated flow rate in gallons per minute (GPM).
A one-touch, button-type interface permits the user to toggle quickly and easily among seven
different hydraulic operating modes: three fixed speeds, three levels of constant pressure,
and the AUTOADAPT setting.
ALPHA offers a flow range of 0 to 21 GPM and a head range from 0 to 19 feet. It can handle fluid temperatures from 36°F to 230°F with a maximum working pressure of 150 pounds per square inch (psi).
Other standard features include:
Plug-and-play convenience: The unique ALPHA Plug eliminates the need to open and wire a terminal box to create an electrical connection. A six-foot-long power cord connects the circulator to a wall outlet, with no wiring required.
Installer-friendly pipe connections: The circulator’s volute has a standard two-bolt flange with a built-in nut-capture feature that holds the bolt steady during tightening. Spared from having to use a second wrench to keep the bolt from slipping or turning, the installer has a free hand to hold the circulator in place.
Backflow prevention: An optional check valve can be integrated into the circulator to
prevent backflow from occurring.
Two different material options: In addition to the cast-iron and cast-iron-rotated models, the ALPHA is available with a stainless steel volute for more challenging, aggressive-water environments.
Made for America: Developed in Europe nearly a decade ago, the ALPHA is a proven technology with millions of successful, high-efficiency installations there. But rather than assuming that the ALPHA would work equally well in North America without modification, Grundfos has tested the product over the past two years in approximately 200 residential installations across the United States and Canada, including many of the installers’ own homes. Feedback from these contractors has led to important adjustments in the hydraulic design of the ALPHA “to better match the specific
requirements of the North American market,” says Reinmund.
“As is our custom with a new product, we did our due diligence with the ALPHA in the United States, taking two full heating seasons to be certain it would perform as well here as it has in Europe,” he continues. “Our objective is to verify the ALPHA as a stable pumping platform for the North American market for many years to come.”
ABOUT GRUNDFOS PUMPS:
Grundfos Pumps Corporation, part of the Grundfos Group, is a global pumps and pumping systems leader serving the residential, commercial building and process industry markets, as well as being a major supplier to the water supply and water treatment industries. Grundfos is known for advanced products, technology, and brands including, Alldos, Hilge, PACO Pumps, Peerless Pumps, and Yeomans Chicago Corp. Producing over 10 million pumps each year, Grundfos strives to improve
reliability and energy savings, and to exceed customer needs wherever water moves. Grundfos is focused on innovative, sustainable solutions while maintaining the highest ethical standards.
Founded in 1945 in Bjerringbro, Denmark, The Grundfos Group is a worldwide enterprise that employs more than 18,000 people in 81 countries with North American headquarters in Olathe, Kansas.
For more information, visit the website at www.grundfos.us